Benutzer-Werkzeuge

Webseiten-Werkzeuge

Zuletzt angesehen:
network_connection

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Nächste Überarbeitung		Vorhergehende Überarbeitung
network_connection [2025/04/07 16:38] – angelegt grnbms_technetwork_connection [2026/04/08 05:17] (aktuell) – grnbms
Zeile 1: Zeile 1:
 ===== Network Settings ===== ===== Network Settings =====
 +
 +⚠️ ''Power over Ethernet (PoE) is not supported for GRN products and must not be used under any circumstances. The use of PoE with GRN products is strictly prohibited. Any non-compliance with this requirement may result in damage to the equipment. The company assumes no liability for any damages, malfunctions, or consequential losses arising from such misuse.''
  
 To configure network settings, go to the **sidebar** and click on **"Network"**.\\ To configure network settings, go to the **sidebar** and click on **"Network"**.\\
Zeile 9: Zeile 11:
 At the top of the page, you’ll find a **dropdown menu** to select the interface you want to configure, e.g.: At the top of the page, you’ll find a **dropdown menu** to select the interface you want to configure, e.g.:
  
-   * +   * ''Ethernet 1'' 
- +  * ''Wi-Fi 1'' 
-''Ethernet 1'' +  * etc.
-  * +
- +
-''Wi-Fi 1'' +
-  * +
- +
-etc.+
  
 ''⚠️ Settings shown below apply **only**  to the selected interface.'' ''⚠️ Settings shown below apply **only**  to the selected interface.''
Zeile 25: Zeile 21:
 === DHCP (automatic) === === DHCP (automatic) ===
  
-  * +  * Enable the **"DHCP"**  checkbox to let the BMS automatically get its IP settings from your router.
- +
-Enable the **"DHCP"**  checkbox to let the BMS automatically get its IP settings from your router.+
  
 === Static IP (manual) === === Static IP (manual) ===
Zeile 33: Zeile 27:
 If **DHCP is disabled**, you need to manually enter: If **DHCP is disabled**, you need to manually enter:
  
-  * +  * **IP Addresses:** 
- +      * Add at least one 
-**IP Addresses:** +      * Use **"+"**  to add more, **"–"**  to remove last 
-      * +  * **DNS Nameservers:** 
- +      * Same add/remove logic 
-Add at least one +      * Used to resolve domain names (e.g. grnbms.de) 
- +  * **Gateway:** 
-      * +      * Usually the IP of your router (e.g. ''192.168.1.1'')
- +
-Use **"+"**  to add more, **"–"**  to remove last +
- +
-  * +
- +
-**DNS Nameservers:** +
-      * +
- +
-Same add/remove logic +
- +
-      * +
- +
-Used to resolve domain names (e.g. grnbms.de) +
- +
-  * +
- +
-**Gateway:** +
-      * +
- +
-Usually the IP of your router (e.g. ''192.168.1.1'')+
  
 ==== 3. Wi-Fi Interface Settings ==== ==== 3. Wi-Fi Interface Settings ====
Zeile 70: Zeile 44:
 If **"Use as Access Point"**  is checked, enter: If **"Use as Access Point"**  is checked, enter:
  
-  * +  * **SSID**  – WiFi name 
- +  * **Password**  – WPA2 key 
-**SSID**  – WiFi name +  * **IP Address**  – e.g. ''192.168.4.1''
-  * +
- +
-**Password**  – WPA2 key +
-  * +
- +
-**IP Address**  – e.g. ''192.168.4.1''+
 ''📶 Devices can connect directly to this access point for setup.'' ''📶 Devices can connect directly to this access point for setup.''
  
Zeile 85: Zeile 53:
 If Access Point mode is **not**  checked, the interface acts like Ethernet: If Access Point mode is **not**  checked, the interface acts like Ethernet:
  
-  * +  * **DHCP checkbox** 
- +  * Or manual: 
-**DHCP checkbox** +      * **IP Address(es)** 
-  * +      * **DNS Servers** 
- +      * **Gateway** 
-Or manual: +''💡 Wrong network settings may make the BMS unreachable. Use DHCP if unsure. ''
- +
-      * +
- +
-**IP Address(es)** +
-      * +
- +
-**DNS Servers** +
-      * +
- +
-**Gateway**+
  
  
network_connection.1744043896.txt.gz · Zuletzt geändert: 2025/04/07 16:38 von grnbms_tech