Dies ist eine alte Version des Dokuments!
Inhaltsverzeichnis
Network Settings
To configure network settings, go to the sidebar and click on „Network“.
This will open the „Network Settings“ section in the main window.
Inside that section, you'll find a box titled „Network Settings“ with all available options for Ethernet and Wi-Fi.
1. Select Interface
At the top of the page, you’ll find a dropdown menu to select the interface you want to configure, e.g.:
Ethernet 1
Wi-Fi 1
etc.
⚠️ Settings shown below apply only to the selected interface.
2. Ethernet Interface Settings
DHCP (automatic)
Enable the „DHCP“ checkbox to let the BMS automatically get its IP settings from your router.
Static IP (manual)
If DHCP is disabled, you need to manually enter:
IP Addresses:
Add at least one
Use „+„ to add more, „–“ to remove last
DNS Nameservers:
Same add/remove logic
Used to resolve domain names (e.g. grnbms.de)
Gateway:
Usually the IP of your router (e.g. 192.168.1.1)
3. Wi-Fi Interface Settings
Wi-Fi interfaces support two modes: Access Point or Client (Station)
➤ Access Point Mode
If „Use as Access Point“ is checked, enter:
SSID – WiFi name
Password – WPA2 key
IP Address – e.g. 192.168.4.1
📶 Devices can connect directly to this access point for setup.
➤ Client Mode (normal Wi-Fi)
If Access Point mode is not checked, the interface acts like Ethernet:
DHCP checkbox
Or manual:
IP Address(es)
DNS Servers
Gateway