mk3:minipinout []

Dies ist eine alte Version des Dokuments!

Inhaltsverzeichnis

GRNbms MK3 Mini – Wiring & Pinout

GRNbms MK3 Mini – Wiring & Pinout

This page provides an overview of the wiring and pinout for the GRNbms MK3 Mini. Please refer to the respective Wiki pages for detailed information about CAN, RS485, and Modbus communication.

Power Supply

Recommended input voltage: 11 – 14 V DC
Power should be supplied via the designated power input pins (see pinout table below).

GRNcmu Connection

The RJ45 port is directly compatible with a standard Ethernet cable.
Designed for seamless plug-and-play connection with the GRNcmu Multi Mini module.

Fan Connector

Compatible with standard 4-pin 12 V PC cooling fans.
The GRNbms provides PWM control and tachometer feedback support.

Display Connector

Ready to use with Nextion displays.
Direct plug-in, no additional adapters required.

Pinout Overview

Supply & Relays

1	Supply GND
2	Supply 12V
3	COM connection of the emergency stop switch
4	NC connection of the emergency stop switch
5	Main Relay -
6	Main Relay +
7	Precharge Relay -
8	Precharge Relay +

5V Aux

1	GND
2	5V Output

 \\ **RS485** \\

1	RS485 A+
2	RS485 B-

Sensors

1	3.3V Output
2	Data
3	GND

GRNcmu RJ45

1	CAN2 High
2	CAN2 Low
3	12V CMU
4	GND
5	GND
6	12V CMU
7	12V CMU
8	GND

Inverter RJ45

1	GND
2	12V
3	-
4	12V
5	GND
6	-
7	CAN1 High
8	CAN1 Low

Inverter, CMU, Shunt - CAN

1	GND
2	Inverter / CMU / Shunt - 12V
3	Inverter / CMU / Shunt - CAN Low
4	Inverter / CMU / Shunt - CAN High

Display

1	5V
2	Display1 RX
3	Display1 TX
4	GND

FAN

1	GND
2	12V
3	Tacho
4	PWM

RS232

1	GND
2	RS232 1 TX
3	RS232 1 RX
4	12V