In the top-right corner of the interface, you’ll see a small envelope icon.
This is the Message Center, which notifies you of system events and alerts.

The envelope will blink when new messages are available.
A colored dot next to it indicates the severity:

• 🔵 Blue – Informational messages (e.g. unsaved settings)
• 🟡 Yellow – Warnings (e.g. high temperature, limits reached)
• 🔴 Red – Errors (e.g. overvoltage, communication failure)

Click the envelope icon to open the Message Center.
There you’ll find a list of recent system messages, including severity levels.

💡 Use this area to diagnose issues, review warnings, and monitor system behavior.

Some messages include a button for quick actions, depending on the message type:

• Unsaved Settings → A button to save the current configuration
• Error Messages → A Discard button to clear the error manually after resolving the issue

⚠️ Discarding an error does not ignore the problem, but triggers a re-evaluation of the system state.
If the issue no longer exists (e.g. temperature back to normal), the relays will re-engage automatically after passing the safety check.