In the top-right corner of the interface, you’ll see a small envelope icon.
This is the Message Center, which notifies you of system events and alerts.

The envelope will blink when new messages are available.
A colored dot next to it indicates the severity:

• 🔵 Blue – Info Informational messages such as unsaved settings or successful actions. 🛈 These do not affect system behavior – purely for user awareness.
• 🟡 Yellow – Warning Early warnings about conditions approaching a limit (e.g. high temperature, low voltage). ⚠️ The system remains fully operational – relays stay on, but attention is recommended.
• 🔴 Red – Error A critical fault has occurred, such as limit violations or safety checks failing. 🛑 The BMS performs a safe shutdown, relays are disabled, and the system waits until the issue is resolved.

Click the envelope icon to open the Message Center.
There you’ll find a list of recent system messages, including severity levels.

💡 Use this area to diagnose issues, review warnings, and monitor system behavior.

Some messages include a button for quick actions, depending on the message type:

• Unsaved Settings → A button to save the current configuration
• Error Messages → A Discard button to clear the error manually after resolving the issue

⚠️ Discarding an error does not ignore the problem, but triggers a re-evaluation of the system state.
If the issue no longer exists (e.g. temperature back to normal), the relays will re-engage automatically after passing the safety check.