To set up inverter communication, go to Inverter in the sidebar.

Select the inverter manufacturer from the dropdown menu.

After selecting a manufacturer, choose the specific model.
Only compatible or unlocked models will be shown.

🔓 Note: Inverter support is modular – individual inverter packages must be purchased and unlocked via grnbms.de.

If a CAN-based inverter is selected, an additional dropdown appears to assign the Primary CAN Bus.
Make sure the correct bus and baud rate are configured under Connections → CAN Bus.

⚠️ Important: Wrong CAN settings or model selection may lead to communication failure or system instability.