===== Inverter Configuration =====

To set up inverter communication, go to **Inverter** in the sidebar.
==== Manufacturer ====

Select the inverter **manufacturer** from the dropdown menu.
==== Model ====

After selecting a manufacturer, choose the **specific model**.\\
Only compatible or unlocked models will be shown.

''🔓 **Note:** Inverter support is modular – individual inverter packages must be **purchased and unlocked** via [[https://grnbms.de|grnbms.de]].''

==== Primary CAN Bus ====

If a **CAN-based inverter** is selected, an additional dropdown appears to assign the **Primary CAN Bus**.\\
Make sure the correct bus and baud rate are configured under **Connections → CAN Bus**.

''⚠️ **Important:** Wrong CAN settings or model selection may lead to communication failure or system instability.''