mk3:messagecenter []

Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt.
===== Message Center =====

In the top-right corner of the interface, you’ll see a **small envelope icon**.\\
This is the **Message Center**, which notifies you of system events and alerts.

{{:mk3:screenshot2025-04-07203451.png?nolink&50}}

==== Notification Indicator ====

The envelope will **blink** when new messages are available.\\
A colored dot next to it indicates the severity:

  * 🔵 **Blue – Info**  Informational messages such as **unsaved settings**  or successful actions. ''🛈 These do **not affect system behavior**  – purely for user awareness.''
  * 🟡 **Yellow – Warning **Early warnings about conditions approaching a limit (e.g. high temperature, low voltage). ''⚠️ The system remains fully operational – relays stay **on**, but attention is recommended.''
  * 🔴 **Red – Error **A critical fault has occurred, such as limit violations or safety checks failing. ''🛑 The BMS performs a **safe shutdown**, relays are **disabled**, and the system waits until the issue is resolved.''

==== Viewing Messages ====

Click the envelope icon to open the **Message Center**. \\ There you’ll find a list of recent system messages, including severity levels.

''💡 Use this area to diagnose issues, review warnings, and monitor system behavior.''

==== Action Buttons ====

Some messages include a **button for quick actions**, depending on the message type:

  * **Unsaved Settings**  → A button to **save**  the current configuration
  * **Error Messages**  → A **Discard**  button to clear the error manually after resolving the issue
''⚠️ **Discarding**  an error does **not ignore the problem**, but triggers a **re-evaluation**  of the system state. \\ If the issue no longer exists (e.g. temperature back to normal), the relays will **re-engage automatically**  after passing the safety check. ''