Benutzer-Werkzeuge

Webseiten-Werkzeuge

Zuletzt angesehen: • supported_current_sensors
mk3:requestbatterytype

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
Nächste Überarbeitung		Vorhergehende Überarbeitung
mk3:requestbatterytype [2025/04/29 13:45] – [Tables (Temperature / SOC Maps)] grnbms_techmk3:requestbatterytype [2025/07/22 11:17] (aktuell) – grnbms_tech
Zeile 8: Zeile 8:
   * Request is **linked to your user account**  and cannot be moved.   * Request is **linked to your user account**  and cannot be moved.
   * Your device must be **registered**  to the same account.   * Your device must be **registered**  to the same account.
 +  * You need at least a **Basic abbo**. Then the option can be found in the sidebar under “Module types”.
  
 ---- ----
Zeile 16: Zeile 17:
  
   * **Name**: Choose a clear name for your battery.   * **Name**: Choose a clear name for your battery.
-—-+''➡️ Ideally include **manufacturer**, **model/type**, and other important details '' \\ ''(e.g., "LG INR18650-MJ1 3500mAh"). \\ This helps with **faster and more accurate matching**  during approval. ''—-
  
 ==== Cell Voltages ==== ==== Cell Voltages ====
Zeile 46: Zeile 47:
   * **Min Balance Voltage**: Start balancing when **cell voltage**  reaches this value.   * **Min Balance Voltage**: Start balancing when **cell voltage**  reaches this value.
   * **Max Balance Voltage**: Stop balancing above this value.   * **Max Balance Voltage**: Stop balancing above this value.
-  * **Max Balance Load**:  Maximum **battery load**  (in %) up to which balancing is still active. \\ If the load exceeds this percentage, balancing is **automatically paused**  to avoid interfering with heavy charging/discharging.+  * **Max Balance Load**: Maximum **battery load**  (in %) up to which balancing is still active. \\ If the load exceeds this percentage, balancing is **automatically paused**  to avoid interfering with heavy charging/discharging.
   * **Balance Current**: Estimated balancing current per cell (A).   * **Balance Current**: Estimated balancing current per cell (A).
   * **Balance Target (overall)**: Balancing goal voltage across all cells.   * **Balance Target (overall)**: Balancing goal voltage across all cells.
 —- —-
- 
  
 ==== Delta (Cell differences) ==== ==== Delta (Cell differences) ====
Zeile 89: Zeile 89:
 ==== Tables (Temperature / SOC Maps) ==== ==== Tables (Temperature / SOC Maps) ====
  
-  *+  * **Temperature vs Current**: Defines **how much current is allowed depending on cell temperature**.🔥 The colder or hotter it gets, the **lower**  the allowed charge/discharge current. 
 +  * **SOC vs Current**: Defines **how much current is allowed depending on State of Charge (SOC %)**.🔋 At very low or very high SOC, the allowed current is automatically **reduced**. 
 +❗ **Important:**  Both maps **limit the maximum available current in %**  relative to the normal current settings!
  
-**Temperature vs Current**: \\ Defines **how much current is allowed depending on cell temperature**. \\ 🔥 The colder or hotter it gets, the **lower**  the allowed charge/discharge current. +(Example: If 50% is set, only half the current is allowed at that point.)
-  * +
- +
-**SOC vs Current**: \\ Defines **how much current is allowed depending on State of Charge (SOC %)**. \\ 🔋 At very low or very high SOC, the allowed current is automatically **reduced**. +
-❗ **Important:** \\ Both maps **limit the maximum available current in %**  relative to the normal current settings! \\ (Example: If 50% is set, only half the current is allowed at that point.)+
  
 **Voltage vs SOC:** **Voltage vs SOC:**
Zeile 102: Zeile 100:
  
 ---- ----
- 
  
 ====== What you must absolutely watch out for: ====== ====== What you must absolutely watch out for: ======
Zeile 113: Zeile 110:
  
 After filling everything carefully, press **"Send Request"**. \\ Your request will be reviewed manually. After filling everything carefully, press **"Send Request"**. \\ Your request will be reviewed manually.
 +
 +–
 +
 +====== What happens after submission? ======
 +
 +  * After you send the request, it will go through a **manual review**  by our team.
 +  * You will receive an **email notification**  at every step:
 +      * When you **submit**  the request
 +      * When your request is **approved**
 +      * When your request is **rejected**
  
  
mk3/requestbatterytype.1745934357.txt.gz · Zuletzt geändert: 2025/04/29 13:45 von grnbms_tech