Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- mk3:requestbatterytype [2025/04/29 13:43] – [Balancing] grnbms_tech
+++ mk3:requestbatterytype [2025/07/22 11:17] (aktuell) – grnbms_tech
@@ Zeile 8: / Zeile 8: @@
   * Request is **linked to your user account**  and cannot be moved.
   * Your device must be **registered**  to the same account.
+  * You need at least a **Basic abbo**. Then the option can be found in the sidebar under “Module types”.
 ----
@@ Zeile 16: / Zeile 17: @@
   * **Name**: Choose a clear name for your battery.
-—-
+''➡️ Ideally include **manufacturer**, **model/type**, and other important details '' \\ ''(e.g., "LG INR18650-MJ1 3500mAh"). \\ This helps with **faster and more accurate matching**  during approval. ''—-
 ==== Cell Voltages ====
@@ Zeile 46: / Zeile 47: @@
   * **Min Balance Voltage**: Start balancing when **cell voltage**  reaches this value.
   * **Max Balance Voltage**: Stop balancing above this value.
-  * **Max Balance Load**:  Maximum **battery load**  (in %) up to which balancing is still active. \\ If the load exceeds this percentage, balancing is **automatically paused**  to avoid interfering with heavy charging/discharging.
+  * **Max Balance Load**: Maximum **battery load**  (in %) up to which balancing is still active. \\ If the load exceeds this percentage, balancing is **automatically paused**  to avoid interfering with heavy charging/discharging.
   * **Balance Current**: Estimated balancing current per cell (A).
   * **Balance Target (overall)**: Balancing goal voltage across all cells.
 —-
 ==== Delta (Cell differences) ====
@@ Zeile 89: / Zeile 89: @@
 ==== Tables (Temperature / SOC Maps) ====
-**Temperature vs Current:**
+  * **Temperature vs Current**: Defines **how much current is allowed depending on cell temperature**.🔥 The colder or hotter it gets, the **lower**  the allowed charge/discharge current.
+  * **SOC vs Current**: Defines **how much current is allowed depending on State of Charge (SOC %)**.🔋 At very low or very high SOC, the allowed current is automatically **reduced**.
+❗ **Important:**  Both maps **limit the maximum available current in %**  relative to the normal current settings!
-  * Defines how much current is allowed depending on temperature.
+(Example: If 50% is set, only half the current is allowed at that point.)
-**SOC vs Current:**
-  * Defines current limits depending on the State of Charge.
 **Voltage vs SOC:**
@@ Zeile 112: / Zeile 110: @@
 After filling everything carefully, press **"Send Request"**. \\ Your request will be reviewed manually.
+–
+====== What happens after submission? ======
+  * After you send the request, it will go through a **manual review**  by our team.
+  * You will receive an **email notification**  at every step:
+      * When you **submit**  the request
+      * When your request is **approved**
+      * When your request is **rejected**