Benutzer-Werkzeuge

Webseiten-Werkzeuge

Zuletzt angesehen:
mk3:requestbatterytype

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
Nächste Überarbeitung		Vorhergehende Überarbeitung
mk3:requestbatterytype [2025/04/29 13:41] – [Temperature] grnbms_techmk3:requestbatterytype [2025/07/22 11:17] (aktuell) – grnbms_tech
Zeile 8: Zeile 8:
   * Request is **linked to your user account**  and cannot be moved.   * Request is **linked to your user account**  and cannot be moved.
   * Your device must be **registered**  to the same account.   * Your device must be **registered**  to the same account.
 +  * You need at least a **Basic abbo**. Then the option can be found in the sidebar under “Module types”.
  
 ---- ----
Zeile 16: Zeile 17:
  
   * **Name**: Choose a clear name for your battery.   * **Name**: Choose a clear name for your battery.
-----+''➡️ Ideally include **manufacturer**, **model/type**, and other important details '' \\ ''(e.g., "LG INR18650-MJ1 3500mAh"). \\ This helps with **faster and more accurate matching**  during approval. ''—-
  
 ==== Cell Voltages ==== ==== Cell Voltages ====
Zeile 26: Zeile 27:
 ❗ **¹ Attention**: ❗ **¹ Attention**:
  
-These voltages are **per cell**! \\ Internally, the system multiplies by the number of **cells in series**  (12S = ×12).+''These voltages are **per cell**! \\ Internally, the system multiplies by the number of **cells in series**  (12S = ×12).''
  
 ---- ----
Zeile 34: Zeile 35:
   * **Temp Sensor Type**: Choose the sensor used (e.g., NTC10k, PT1000, etc.).   * **Temp Sensor Type**: Choose the sensor used (e.g., NTC10k, PT1000, etc.).
   * **Temp Sensor Count (GRN CMU)**: How many temp sensors your CMU uses (0–3).   * **Temp Sensor Count (GRN CMU)**: How many temp sensors your CMU uses (0–3).
-ℹ️ **Note:** \\ These fields are **only relevant**  if you are using a **GRN CMU**  (Cell Monitoring Unit). \\ If your battery does **not**  use a GRN CMU, you can ignore these settings.+ℹ️ **Note:** \\ ''These fields are **only relevant**  if you are using a **GRN CMU**  (Cell Monitoring Unit). \\ If your battery does **not**  use a GRN CMU, you can ignore these settings.''
  
   * **Min Temp Warning**: Below this temperature you get a **warning**.   * **Min Temp Warning**: Below this temperature you get a **warning**.
Zeile 41: Zeile 42:
   * **Max Temp Error**: Above this, the system enters **error**. (All values in °C)   * **Max Temp Error**: Above this, the system enters **error**. (All values in °C)
 —- —-
- 
  
 ==== Balancing ==== ==== Balancing ====
Zeile 47: Zeile 47:
   * **Min Balance Voltage**: Start balancing when **cell voltage**  reaches this value.   * **Min Balance Voltage**: Start balancing when **cell voltage**  reaches this value.
   * **Max Balance Voltage**: Stop balancing above this value.   * **Max Balance Voltage**: Stop balancing above this value.
-  * **Max Balance Load**: Maximum PWM percentage (0–100 %) the balancing circuit uses.+  * **Max Balance Load**: Maximum **battery load**  (in %) up to which balancing is still active. \\ If the load exceeds this percentage, balancing is **automatically paused**  to avoid interfering with heavy charging/discharging.
   * **Balance Current**: Estimated balancing current per cell (A).   * **Balance Current**: Estimated balancing current per cell (A).
   * **Balance Target (overall)**: Balancing goal voltage across all cells.   * **Balance Target (overall)**: Balancing goal voltage across all cells.
-----+—-
  
 ==== Delta (Cell differences) ==== ==== Delta (Cell differences) ====
Zeile 60: Zeile 60:
 ❗ **¹ Attention**: ❗ **¹ Attention**:
  
-The value you set is **per cell**  but the system multiplies it with the number of **cells in series**  for calculations.+''The value you set is **per cell**  but the system multiplies it with the number of **cells in series**  for calculations.''
  
 ---- ----
Zeile 89: Zeile 89:
 ==== Tables (Temperature / SOC Maps) ==== ==== Tables (Temperature / SOC Maps) ====
  
-**Temperature vs Current:**+  * **Temperature vs Current**: Defines **how much current is allowed depending on cell temperature**.🔥 The colder or hotter it gets, the **lower**  the allowed charge/discharge current. 
 +  * **SOC vs Current**: Defines **how much current is allowed depending on State of Charge (SOC %)**.🔋 At very low or very high SOC, the allowed current is automatically **reduced**. 
 +❗ **Important:**  Both maps **limit the maximum available current in %**  relative to the normal current settings!
  
-  * Defines how much current is allowed depending on temperature. +(Example: If 50% is set, only half the current is allowed at that point.)
- +
-**SOC vs Current:** +
- +
-  * Defines current limits depending on the State of Charge.+
  
 **Voltage vs SOC:** **Voltage vs SOC:**
Zeile 112: Zeile 110:
  
 After filling everything carefully, press **"Send Request"**. \\ Your request will be reviewed manually. After filling everything carefully, press **"Send Request"**. \\ Your request will be reviewed manually.
 +
 +–
 +
 +====== What happens after submission? ======
 +
 +  * After you send the request, it will go through a **manual review**  by our team.
 +  * You will receive an **email notification**  at every step:
 +      * When you **submit**  the request
 +      * When your request is **approved**
 +      * When your request is **rejected**
  
  
mk3/requestbatterytype.1745934067.txt.gz · Zuletzt geändert: 2025/04/29 13:41 von grnbms_tech