Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- mk3:relaymode [2025/04/07 17:17] – grnbms_tech
+++ mk3:relaymode [2025/05/23 09:10] (aktuell) – [Available Relay Modes] grnbms_tech
@@ Zeile 1: / Zeile 1: @@
-===== Relay Type Configuration =====
+===== Relay Mode Configuration =====
-To set the relay control mode, go to **Battery → Relay Type** in the sidebar.
+To set the relay control mode, go to **Battery → Relay Mode** in the sidebar.
 This setting determines how the BMS handles relay logic based on your system voltage and wiring.
@@ Zeile 11: / Zeile 11: @@
    * Designed for **high voltage systems**
   * Activates the full 3-relay setup including precharge and isolation test
-  * Matches the HV relay wiring described [[:mk3:here|]]
+  * Matches the HV relay wiring described [[:mk3:hvrelaywirring|here]]
 **2. LV with Precharge**
@@ Zeile 17: / Zeile 17: @@
   * For **low voltage systems**  (e.g. 12 V or 24 V setups)
   * Uses a simplified relay logic with optional precharge
+  * Matches the HV relay wiring described [[:mk3:lvrelays|here]]
+**3. ReadBack Relays with STO** \\ //Only available on GRNbms_MK3_HV_STO//
+  * Monitors relay state of battery plus and minus via 4 SPDT switches per relay
+  * Simple on/off switching without precharge
+  * Full monitoring of switch-on and switch-off process
+  * Includes a 24 V STO output to control external inverters
+  * Wiring diagram available [[:mk3:stowiring|here]]
 ''⚠️ Make sure the selected mode matches your **physical wiring**, otherwise the system may not function correctly.''
 ==== Activation Required ====