Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- mk3:relaymode [2025/04/07 17:16] – angelegt grnbms_tech
+++ mk3:relaymode [2025/05/23 09:10] (aktuell) – [Available Relay Modes] grnbms_tech
@@ Zeile 1: / Zeile 1: @@
-===== Relay Type Configuration =====
+===== Relay Mode Configuration =====
-To set the relay control mode, go to **Battery → Relay Type** in the sidebar.
+To set the relay control mode, go to **Battery → Relay Mode** in the sidebar.
 This setting determines how the BMS handles relay logic based on your system voltage and wiring.
@@ Zeile 9: / Zeile 9: @@
 **1. Onboard HV Isolation Test**
-   *
+   * Designed for **high voltage systems**
+  * Activates the full 3-relay setup including precharge and isolation test
-Designed for **high voltage systems**
+  * Matches the HV relay wiring described [[:mk3:hvrelaywirring|here]]
-  *
-Activates the full 3-relay setup including precharge and isolation test
-  *
-Matches the HV relay wiring described [[here|]]
 **2. LV with Precharge**
-  *
+  * For **low voltage systems**  (e.g. 12 V or 24 V setups)
+  * Uses a simplified relay logic with optional precharge
+  * Matches the HV relay wiring described [[:mk3:lvrelays|here]]
-For **low voltage systems**  (e.g. 12 V or 24 V setups)
+**3. ReadBack Relays with STO** \\ //Only available on GRNbms_MK3_HV_STO//
-  *
+  * Monitors relay state of battery plus and minus via 4 SPDT switches per relay
+  * Simple on/off switching without precharge
+  * Full monitoring of switch-on and switch-off process
+  * Includes a 24 V STO output to control external inverters
+  * Wiring diagram available [[:mk3:stowiring|here]]
-Uses a simplified relay logic with optional precharge
+''⚠️ Make sure the selected mode matches your **physical wiring**, otherwise the system may not function correctly.''
-''⚠️ Make sure the selected mode matches your **physical wiring**, otherwise the system may not function correctly.''
 ==== Activation Required ====