Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- mk3:quick_start_guide [2025/04/07 15:57] – grnbms_tech
+++ mk3:quick_start_guide [2025/04/07 19:02] (aktuell) – [2. Network Connection] grnbms_tech
@@ Zeile 10: / Zeile 10: @@
   * Connect 12 V to the **"Jump Start"**  connector
   * This powers the BMS directly for low-voltage applications or setup/configuration
+''👉 Details about relay and output wiring can be found [[:mk3:lvrelays|here]]''
 === ➤ High Voltage Mode ===
@@ Zeile 41: / Zeile 43: @@
 ==== 2. Network Connection ====
-An internet connection is required for the **initial setup**  and activation of your BMS.
+An internet connection is required for the **initial setup** and activation of your BMS.
-''📝 **Note:**  A [[https://grnbms.de|GRNbms.de]] account is required to complete the setup. \\
+''📝 **Note:** A [[https://grnbms.de|GRNbms.de]] account is required to complete the setup.\\
 You can create one during the initial configuration or in advance here.''
@@ Zeile 59: / Zeile 61: @@
 The BMS will create a hotspot:
-  * **SSID:**''GRNbms_MK3_AP''
+  * **SSID: **''GRNbms_MK3_AP''
-  * **Password:**''0123456789''
+  * **Password: **''0123456789''
-  * **IP Address:**''192.168.4.1''
+  * **IP Address: **''192.168.4.1''
 Connect to the hotspot and open ''[[http://192.168.4.1|http://192.168.4.1]]''to start setup.
@@ Zeile 74: / Zeile 76: @@
 === ➤ Can’t find your BMS? ===
-No problem – just visit ** grnbms.de ** \\ There you can see all BMS devices in your local network.
+No problem – just visit ''[[https://grnbms.de|GRNbms.de]]'' \\ There you can see all BMS devices in your local network.
 ====   ====
 ====   ====
 ==== 3. Initial Setup Wizard ====