Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- mk3:quick_start_guide [2025/04/07 15:49] – grnbms_tech
+++ mk3:quick_start_guide [2025/04/07 19:02] (aktuell) – [2. Network Connection] grnbms_tech
@@ Zeile 1: / Zeile 1: @@
-==== ====== GRNbms MK3 Quick Start Guide ====== ====
+===== GRNbms MK3 Quick Start Guide =====
-~~TOC~~
+==== 1. Power Supply ====
-==== === 1. Power Supply === ====
 The GRNbms MK3 supports both **High Voltage (HV)** and **Low Voltage (LV)** operation.
@@ Zeile 12: / Zeile 10: @@
   * Connect 12 V to the **"Jump Start"**  connector
   * This powers the BMS directly for low-voltage applications or setup/configuration
+''👉 Details about relay and output wiring can be found [[:mk3:lvrelays|here]]''
 === ➤ High Voltage Mode ===
@@ Zeile 37: / Zeile 37: @@
 ''👉 Details about relay and output wiring can be found [[:mk3:hvrelaywirring|here]]''
-==== === 2. Network Connection === ====
+====   ====
-An internet connection is required for the **initial setup**  and activation of your BMS.
+====   ====
-''📝 **Note:**  A [[https://grnbms.de|GRNbms.de]] account is required to complete the setup. \\
+==== 2. Network Connection ====
+An internet connection is required for the **initial setup** and activation of your BMS.
+''📝 **Note:** A [[https://grnbms.de|GRNbms.de]] account is required to complete the setup.\\
 You can create one during the initial configuration or in advance here.''
@@ Zeile 57: / Zeile 61: @@
 The BMS will create a hotspot:
-  * **SSID:**''GRNbms_MK3_AP''
+  * **SSID: **''GRNbms_MK3_AP''
-  * **Password:**''0123456789''
+  * **Password: **''0123456789''
-  * **IP Address:**''192.168.4.1''
+  * **IP Address: **''192.168.4.1''
 Connect to the hotspot and open ''[[http://192.168.4.1|http://192.168.4.1]]''to start setup.
@@ Zeile 72: / Zeile 76: @@
 === ➤ Can’t find your BMS? ===
-===  No problem – just visit ** grnbms.de ** \\ There you can see all BMS devices in your local network. \\
+No problem – just visit ''[[https://grnbms.de|GRNbms.de]]'' \\ There you can see all BMS devices in your local network.
+====   ====
+====   ====
+==== 3. Initial Setup Wizard ====
+When you access the BMS interface for the first time, a guided setup will begin automatically.
+=== ➤ Step 1: Network Connection ===
+If no internet connection is available, the BMS will first ask you to connect it to the internet (via Ethernet or WLAN).
+=== ➤ Step 2: Login ===
+Once online, you will be prompted to log in with your [[https://grnbms.de|GRNbms.de]] account.
+''🧑‍💼 The first user to log in will automatically become the **owner**  of this BMS system.''
+=== ➤ Step 3: Software Update ===
+If a firmware update is available, the BMS will guide you through the update process before proceeding.
+=== ➤ Final: Dashboard ===
+After completing all steps, you will be redirected to the **main overview page**, where you can continue configuration.
-=== 3. Setup Wizzard === ===
+''🔐 To make further changes, you need to **log in again**  via the login button in the top right corner of the web interface.''