Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- mk3:quick_start_guide [2025/04/07 15:44] – grnbms_tech
+++ mk3:quick_start_guide [2025/04/07 19:02] (aktuell) – [2. Network Connection] grnbms_tech
@@ Zeile 1: / Zeile 1: @@
+===== GRNbms MK3 Quick Start Guide =====
 ==== 1. Power Supply ====
@@ Zeile 8: / Zeile 10: @@
   * Connect 12 V to the **"Jump Start"**  connector
   * This powers the BMS directly for low-voltage applications or setup/configuration
+''👉 Details about relay and output wiring can be found [[:mk3:lvrelays|here]]''
 === ➤ High Voltage Mode ===
@@ Zeile 32: / Zeile 36: @@
 ''👉 Details about relay and output wiring can be found [[:mk3:hvrelaywirring|here]]''
+====   ====
+====   ====
 ==== 2. Network Connection ====
-An internet connection is required for the **initial setup**  and activation of your BMS.
+An internet connection is required for the **initial setup** and activation of your BMS.
-''📝 **Note:**  A [[https://grnbms.de|GRNbms.de]] account is required to complete the setup. \\
+''📝 **Note:** A [[https://grnbms.de|GRNbms.de]] account is required to complete the setup.\\
 You can create one during the initial configuration or in advance here.''
@@ Zeile 49: / Zeile 57: @@
 If no Ethernet is available, the BMS can create a **WiFi access point**:
-  *
+  * Plug in a **compatible USB WiFi stick****before power-on**
+  * ''✅ Must be a supported chip – see [[:mk3:compatible_wifi_sticks_list|compatible WiFi sticks list]]''
+The BMS will create a hotspot:
-Plug in a **compatible USB WiFi stick****before power-on**
+  * **SSID: **''GRNbms_MK3_AP''
+  * **Password: **''0123456789''
+  * **IP Address: **''192.168.4.1''
+Connect to the hotspot and open ''[[http://192.168.4.1|http://192.168.4.1]]''to start setup.
-<blockquote>
+=== ➤ Accessing the BMS ===
-✅ Must be a supported chip – see [[compatible WiFi sticks list|]]
+Once connected, try opening one of the following in your browser:
-</blockquote>
+  * ''[[http://grnbmsmk3/|http://grnbmsmk3/]]''
-  *
+  * ''[[http://grnbmsmk3.local/|http://grnbmsmk3.local/]]''
+''💡 These names work only if your router supports mDNS or local hostname resolution.''
-The BMS will create a hotspot:
+=== ➤ Can’t find your BMS? ===
-      *
+No problem – just visit ''[[https://grnbms.de|GRNbms.de]]'' \\ There you can see all BMS devices in your local network.
-**SSID:**''GRNbms_MK3_AP''
+====   ====
-      *
-**Password:**''0123456789''
+====   ====
-      *
-**IP Address:**''192.168.4.1''
-Connect to the hotspot and open ''[[http://192.168.4.1|http://192.168.4.1'']]'' to start setup.
-=== ➤ Accessing the BMS ===
+==== 3. Initial Setup Wizard ====
-Once connected, try opening one of the following in your browser:
+When you access the BMS interface for the first time, a guided setup will begin automatically.
-  * ''[[http://grnbmsmk3/|http://grnbmsmk3/]]''
+=== ➤ Step 1: Network Connection ===
-  * ''[[http://grnbmsmk3.local/|http://grnbmsmk3.local/]]''
-''💡 These names work only if your router supports mDNS or local hostname resolution.''
-=== ➤ Can’t find your BMS? ===
+If no internet connection is available, the BMS will first ask you to connect it to the internet (via Ethernet or WLAN).
+=== ➤ Step 2: Login ===
+Once online, you will be prompted to log in with your [[https://grnbms.de|GRNbms.de]] account.
+''🧑‍💼 The first user to log in will automatically become the **owner**  of this BMS system.''
+=== ➤ Step 3: Software Update ===
+If a firmware update is available, the BMS will guide you through the update process before proceeding.
+=== ➤ Final: Dashboard ===
+After completing all steps, you will be redirected to the **main overview page**, where you can continue configuration.
-No problem – just visit **[[https://grnbms.de|grnbms.de]]** \\ There you can see all BMS devices in your local network.
+''🔐 To make further changes, you need to **log in again**  via the login button in the top right corner of the web interface.''