Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- mk3:messagecenter [2025/04/07 18:35] – grnbms_tech
+++ mk3:messagecenter [2025/04/07 18:45] (aktuell) – grnbms_tech
@@ Zeile 11: / Zeile 11: @@
 A colored dot next to it indicates the severity:
-  * 🔵 **Blue**  – Informational messages (e.g. startup complete)
+  * 🔵 **Blue – Info**  Informational messages such as **unsaved settings**  or successful actions. ''🛈 These do **not affect system behavior**  – purely for user awareness.''
-  * 🟡 **Yellow**  – Warnings (e.g. high temperature, limits reached)
+  * 🟡 **Yellow – Warning **Early warnings about conditions approaching a limit (e.g. high temperature, low voltage). ''⚠️ The system remains fully operational – relays stay **on**, but attention is recommended.''
-  * 🔴 **Red**  – Errors (e.g. overvoltage, communication failure)
+  * 🔴 **Red – Error **A critical fault has occurred, such as limit violations or safety checks failing. ''🛑 The BMS performs a **safe shutdown**, relays are **disabled**, and the system waits until the issue is resolved.''
 ==== Viewing Messages ====
-Click the envelope icon to open the **Message Center**. \\ There you’ll find a list of recent system messages, including timestamps and severity levels.
+Click the envelope icon to open the **Message Center**. \\ There you’ll find a list of recent system messages, including severity levels.
-''💡 Use this area to diagnose issues, review warnings, and monitor system behavior in real time.''
+''💡 Use this area to diagnose issues, review warnings, and monitor system behavior.''
+==== Action Buttons ====
+Some messages include a **button for quick actions**, depending on the message type:
+  * **Unsaved Settings**  → A button to **save**  the current configuration
+  * **Error Messages**  → A **Discard**  button to clear the error manually after resolving the issue
+''⚠️ **Discarding**  an error does **not ignore the problem**, but triggers a **re-evaluation**  of the system state. \\ If the issue no longer exists (e.g. temperature back to normal), the relays will **re-engage automatically**  after passing the safety check. ''