Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- mk3:lvrelays [2025/04/07 18:06] – grnbms_tech
+++ mk3:lvrelays [2025/06/25 09:55] (aktuell) – [Relay Control] grnbms
@@ Zeile 4: / Zeile 4: @@
 It is intended for 12 V or 24 V systems and uses the **"Jump Start" 12 V input** for powering the BMS.
-LV Relay Wiring Diagram
+''⚠️ **Voltage Range:** The BMS accepts only **10 V to 17 V** at the Jump Start input.\\
+If your battery voltage is outside this range (e.g. 24 V system), you **must use a DC-DC converter** to step the voltage down to a safe level.''
+''💡 Using too high a voltage on the 12 V input can **damage the BMS**!''
+''🔥 Always follow safety guidelines and consult a professional installer.\\
+Incorrect wiring can cause **damage, malfunction, or fire**. Use at your own risk.''{{:mk3:screenshot2025-04-07200216.png?nolink&793x418}}
 ==== Components Overview ====
@@ Zeile 30: / Zeile 36: @@
   * The BMS monitors all timing and status automatically
-==== Important Notes ====
+👉 We recommend using relays with economizer to avoid unnecessary load on the BMS power supply
-  * **Termination resistor**  and **CAN wiring**  must still be set correctly
-  * **Precharge path must include the shunt**  to allow current monitoring during startup
-  * This wiring is intended for **LV systems only**  – use HV wiring for 150–1200 V setups
-''🔥 Always follow safety guidelines and consult a professional installer. \\ Incorrect wiring can cause **damage, malfunction, or fire**. Use at your own risk.''