Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- mk3:cmu18s [2025/11/06 18:58] – angelegt grnbms_tech
+++ mk3:cmu18s [2025/11/06 19:05] (aktuell) – [GRNcmu Connection] grnbms_tech
@@ Zeile 10: / Zeile 10: @@
 ==== GRNcmu Connection ====
-{{:mk3:cmu18spinout.png?nolink&300}}
+{{:mk3:cmu18spinout.png?nolink&600}}
+^Connector 1^ |
+|1|GND Temp Sensor|
+|2|GND Temp Sensor|
+|3|Temp Sensor 3|
+|4|Cell 17|
+|5|Cell 15|
+|6|Cell 13|
+|7|Cell 11|
+|8|Cell 9|
+|9|Cell 7|
+|10|Cell 5|
+|11|Cell 3|
+|12|Cell 1|
+|13|Temp Sensor 2|
+|14|Temp Sensor 1|
+|15|Cell 18|
+|16|Cell 16|
+|17|Cell 14|
+|18|Cell 12|
+|19|Cell 10|
+|20|Cell 8|
+|21|Cell 6|
+|22|Cell 4|
+|23|Cell 2|
+|24|Cell 0|
+^Connector 2 + 3^ |
+|1|12V Supply|
+|2|CAN-High|
+|3|Rail Positiv|
+|4|NOT CONNECT!|
+|5|GND|
+|6|CAN-Low|
+|7|Rail Negativ|
+|8|NOT CONNECT!|
+The positive and negative rails must each be connected to EVERY CMU in the system.
+Connectors 2 and 3 are internally connected and can therefore be used for day chaining.